As a CTS Engineering Technician, you will perform light to moderate labor-intensive field duties and testing under the direction of other engineers or staff professionals with minimal analysis of data required. Essential Duties and Responsibilities: - Perform on-site observation and monitoring, pre and post construction surveys, field and laboratory testing and analysis, field sampling of potentially hazardous soil, and subsurface investigations. - Write drafts of field reports, inspection/engineering reports, and technical specifications. - Data gathering in the field of various engineering support programs, such as geophysical surveying, subsurface investigations, air & water sampling, load testing, structural monitoring, electrical resistivity, mass concrete temperature monitoring, and deep foundation inspections. - Occasionally perform field testing of soils, concrete, masonry, and asphalt to determine compliance with project specifications. Assist the laboratory with index testing when there are high volumes of samples in-house.

Analytical Balance Laboratory,  division of The RISE Group, is a seeking to hire a Laboratory Intern.  The person in this position will follow direction from the Lab Analyst. The person in this position should be able to work independently when necessary.  This position is Part Time, Monday – Friday, This position will be held out of our Middleboro, MA office. 

RISE Engineering is seeking an Installer to be responsible to install energy efficiency measures in commercial buildings, apartment complexes and condominiums to support utility-sponsored energy efficiency programs in New York. The position is based out of the Queens Office, and is responsible for the Long Island, NY territory.  Hours are M-F, 8:00am- 5:00pm.   Duties & Responsibilities - Generate domestic-hot-water installation opportunities by following up on commercial leads in the field - Clearly explain energy-efficiency program objectives to prospective customers - Install low flow, pre-rinse spray valves and other energy efficiency measures - Record data and complete installation paperwork - Travel throughout the service territory on a daily basis - Complete tasks within set timelines and adapt quickly to change - Adhere to the company’s safety policies and procedures

As a HVAC/R Service Technician, you will repair, maintain, replace and retrofit all manner of HVAC and Refrigeration equipment for the benefit of our customers.    - Expertise in diagnosis and repair of systems including (but not limited to): Rooftop Units, gas heating systems, split systems, walk-in coolers/freezer, ice machines, heat pumps, variable refrigerant flow systems, mini split systems, exhaust fans, energy recovery ventilators, makeup air units, chillers, boilers, hydronic pumps, and more. - Come to work with your own hand tools and instruments of the trade - Expertise in electrical wiring diagrams and control troubleshooting - Ability to go “on call” for a week at a time on rotating basis for after-hours coverage - Excellent communication skills & customer relations – includes use of iPhone/iPad. - Act as “lead technician” on replacement jobs and supervise helpers  - Safety on the road and on the jobsite at all times - Experience with DDC is a plus - Other duties as assigned

As an Electrical Apprentice, you will work under the supervision of a Journeymen Electrician performing the installation and retrofitting of premium efficiency lighting in a wide variety of commercial and industrial facilities.  This position will work from a variety of ladders and aerial lifts to perform the installations and will be required to drive from location to location throughout the course of the workday and work week.  This position requires strict adherence to company safety guidelines and practices, as well as maintaining a clean work site that minimally interferes with customers’ business operations.  - Inspect, repair, install, modify, and maintain electrical/electronic systems, circuits, and equipment. - Provide accurate written documentation and progress reports.

RISE Engineering is seeking a Residential Energy Specialist to conduct scheduled home energy assessments. This position is full time, Monday – Friday, 8:00am – 5:00pm.  - Conduct thorough, accurate residential energy audits to evaluate factors such as insulation, appliances, HVAC systems, lighting and electrical systems, moisture and air quality that affect home energy use, durability, safety and comfort.   - Conduct in-home energy tests on the combustion appliances and install instant-savings measures such as energy-efficient light bulbs and water-conservation devices.   - Use proprietary software to prepare on-site assessment reports.   - Explain recommended energy-efficiency measures and associated benefits, costs and savings.   - Secure homeowner approval of proposed work and coordinate available rebates and financing options.   - Follow up with homeowners to ensure high customer satisfaction.   - With company support, obtain BPI Building Analyst certification within six months of hire.   

RISE Engineering is seeking a Residential Energy Specialist to conduct scheduled home energy assessments. This position is full time, Monday – Friday, 8:00am – 5:00pm, and will be located in the RI area.    - Conduct thorough, accurate residential energy audits to evaluate factors such as insulation, appliances, HVAC systems, lighting and electrical systems, moisture and air quality that affect home energy use, durability, safety and comfort.   - Conduct in-home energy tests on the combustion appliances and install instant-savings measures such as energy-efficient light bulbs and water-conservation devices.   - Use proprietary software to prepare on-site assessment reports.   - Explain recommended energy-efficiency measures and associated benefits, costs and savings.   - Secure homeowner approval of proposed work and coordinate available rebates and financing options.   - Follow up with homeowners to ensure high customer satisfaction.   - With company support, obtain BPI Building Analyst certification within six months of hire.   

As a construction testing Laboratory Technician, you will perform light to moderate labor-intensive field and lab duties and testing under the direction of other technicians or staff professionals with minimal analysis of data required. This full-time position will work out of the Cranston, RI location with occasional local travel within RI and MA. Training is available!  - Perform field and occasional lab testing of soils, concrete and asphalt to determine compliance with project specifications.   - All testing reports and observations must be tabulated and submitted daily in an electric report   - Reading and interpreting project drawings and specifications, and entering data related to the various job tasks.   - You will be required to keep equipment clean and in good working order.   - Interact with construction personnel, engineers and state and federal representatives while presenting yourself as a professional representative of the company.   - Responsible for transporting material samples to laboratory for further testing and analysis    - Driving and maintaining the appearance and operation of company vehicles to and from job sites.   - All work with be conducted in accordance with OSHA regulations and TEI Safety standards    - This job operates in both a professional office environment as well as on a variety of outdoor job sites - Position will entail occasional exposure to outside work, dusty environments as well as sedentary work.  

As a Journeyman Electrician, you will perform the installation and retrofitting of premium efficiency lighting in a wide variety of commercial and industrial facilities.  You will work with a variety of ladders and aerial lifts to perform the installations, and will be required to drive from location to location throughout the course of the workday and work week.  This position requires strict adherence to company safety guidelines and practices, as well as maintaining a clean work site that minimally interferes with customers’ business operations.  The position is responsible for RI and Southeastern MA territory.

RISE is currently seeking an Installer to be responsible to install energy efficiency measures in commercial buildings, apartment complexes and condominiums to support utility-sponsored energy efficiency programs in New York. The position is based out of the Syracuse, NY territory.  Hours are M-F, 8:00am- 5:00pm.   Duties & Responsibilities - Generate domestic-hot-water installation opportunities by following up on commercial leads in the field - Clearly explain energy-efficiency program objectives to prospective customers - Install low flow, pre-rinse spray valves and other energy efficiency measures - Record data and complete installation paperwork - Travel throughout the service territory on a daily basis - Complete tasks within set timelines and adapt quickly to change - Adhere to the company’s safety policies and procedures

As a Plumber/Pipefitter, you will work under the direction of company supervisors who will direct your daily activities at client sites.  These activities will include a wide range of mechanical disciplines, such as cutting and threading of pipe, assembling and installing industrial equipment, and fabrication and welding of structural members.  During the course of a normal work week, you may report to several different client sites.      As a team member you will represent the eyes and ears of the company, effectively communicating technical information, reinforcing high quality workmanship, and positively reinforcing the company safety goals.       Essential Duties and Responsibilities - Arriving at determined job sites on time and in proper condition to perform physical work. - Effectively take direction and ability to react to dynamic work environment. - Thorough understanding of the safe operation of mechanic position tooling. - Physical installation of industrial piping, mechanical equipment, and systems.   - Effective communication with supervisor on project regarding productivity, scheduling, and safety issues. - Maintain clean work area - Complete paperwork in a timely and efficient manner - Install, repair, and replace various commercial systems   Safety& Physical Demands - Daily OHSA Pre-Work Safety Meetings & Check with on-site crew - Adherence to all Safety Standards as outlined within Thielsch Engineering’s Safety Policy - Maintenance of OSHA 10 Hour Training - Ability to lift weight up to 40lbs in both a vertical and horizontal range of motion, as needed. - Ability to crawl, stoop, stand, reach (push/pull) & bend as needed - Ability to drive and walk around on job sites, indoor and outdoor environments - Ability to ascend or descend on extension ladders, step ladders and stairs using feet and/or hands and arms, as needed. - Ability to work in confined or high places.

Creative, a Division of The RISE Group is dedicated to providing the highest quality MEP/FP (HVAC, plumbing, electrical and fire protection) engineering in the tri-state New England area of MA, RI and CT. Creative provides building system engineering consulting services to a large client base including the educational, institutional, commercial, multi-family, and industrial sectors in Southern New England. CEC’s extensive repeat business from prior customers and diversified clientele allows the firm to maintain a competitive edge in the engineering industry while maintaining financial stability. Responsibilities - Plumbing Designer, Fire Protection is involved in the study, design, and construction phase for the firm’s MEP/FP plans and specifications. Projects may include Plumbing systems for office buildings, schools, multi-family, commercial and industrial buildings. - This position will manage multiple projects simultaneously with the end product being delivered on-time and within budget up to Creative and industry standards. - Frequent communication with clients and with internal cross-functional engineering teams to fully coordinate the engineering work and contribute efforts in expanding MEP/FP service within the firm - activities may include but are not limited to project assessment, pricing, and writing proposals. - Contribute efforts in expanding MEP/FP service within the firm- activities may include but are not limited to project assessment, pricing, and writing proposals. - Delegate design tasks to Junior Staff members. - Travel to job sites to evaluate projects in progress  Physical Demands - Light/Medium work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently. - Ability of climb, stoop, kneel, crouch, and crawl frequently while on the work site - Climb up and down ladder - While working in the office the worker will sit a majority of the time and walk occasionally   Work Environment - The physical environment requires the employee to work both inside and outside - Worker may be subject to loud noises and hot and cold temperatures while on a work site - May occasionally walk on slippery or uneven surfaces - Will climb ladders on an occasional basis - While working in the office the worker will operate in a professional office environment and routinely use standard office equipment Travel - 10%-50% of the time required to travel to and from job sites

As a Mechanical Designer, you will provide on-site engineering and support, collaborating with a team of engineers and designers with diverse backgrounds and experience levels.  This is an exciting opportunity to gain engineering design experience and advance your knowledge in plumbing, fire protection and HVAC design.   Conduct design review and commissioning services for plumbing, fire sprinkler, and HVAC systems. Duties include review of designs and submittals; verification of as-built and redline drawings; construction surveys and inspections; development and partial witnessing of pre-functional checklists; and development and executing functional performance tests.  - Review of designs will include evaluating whether the designer has met the owner’s intent based on contract serviceability, maintainability, and operability requirements, that the designer has adhered to all applicable building codes, and assess whether systems and components are adequately sized for owner/tenant identified requirements.  - Use BIM systems and drafting software to produce engineered drawings. - Provide technical assistance to develop statements of work for projects related to all aspects of the built environment for building owner and stakeholders  - Apply fundamental engineering principles to create efficient, practical solutions to design challenges that are not addressed by the straightforward application of existing protection codes and standards.  - Use code and accepted engineering practices to size waste & vent, natural gas, and domestic plumbing systems. - Use specialized software to perform hydraulic calculations for the sizing of fire sprinkler systems. - Perform HVAC load calculations and assist with equipment selection. - Meet client and customer needs and expectations by completing assigned tasks in the time allotted, and effectively communicating with project team members, clients, customers, and others. Compose technical letters and reports to address specific technical concepts as may be needed by assigned tasks.

RISE Engineering is seeking a Residential Energy Specialist to conduct scheduled home energy assessments. This position is full time, Monday – Friday, 8:00am – 5:00pm, and will be located in the  Fall River/ SouthEastern, MA area. - Conduct thorough, accurate residential energy audits to evaluate factors such as insulation, appliances, HVAC systems, lighting and electrical systems, moisture and air quality that affect home energy use, durability, safety and comfort.   - Conduct in-home energy tests on the combustion appliances and install instant-savings measures such as energy-efficient light bulbs and water-conservation devices.   - Use proprietary software to prepare on-site assessment reports.   - Explain recommended energy-efficiency measures and associated benefits, costs and savings.   - Secure homeowner approval of proposed work and coordinate available rebates and financing options.   - Follow up with homeowners to ensure high customer satisfaction.   - With company support, obtain BPI Building Analyst certification within six months of hire.   

RISE Engineering is seeking a Residential Energy Specialist to conduct scheduled home energy assessments. This position is full time, Monday – Friday, 8:00am – 5:00pm, and will be located in the Plymouth, MA area.  - Conduct thorough, accurate residential energy audits to evaluate factors such as insulation, appliances, HVAC systems, lighting and electrical systems, moisture and air quality that affect home energy use, durability, safety and comfort.   - Conduct in-home energy tests on the combustion appliances and install instant-savings measures such as energy-efficient light bulbs and water-conservation devices.   - Use proprietary software to prepare on-site assessment reports.   - Explain recommended energy-efficiency measures and associated benefits, costs and savings.   - Secure homeowner approval of proposed work and coordinate available rebates and financing options.   - Follow up with homeowners to ensure high customer satisfaction.   - With company support, obtain BPI Building Analyst certification within six months of hire.   

As a Metallurgical Laboratory Technician, you will use photographic and metallographic techniques to evaluate tubes, pipes, plates, castings, welded components, heat-treated parts and coated samples. These evaluations may be performed to determine cause of failure, provide a condition assessment, assess material compliance to a specification, or reverse engineer a part. - - You will develop a basic understanding of material failure mechanisms and laboratory processes required to document relevant features.  - You will document and prepare samples and perform analysis of failed industrial components in our laboratory setting. - Maintain consistent and accurate process controls. - Maintain production flow through laboratory, by working on multiple projects in parallel.   - Take photographs, record data and upload results on project network.  - Fully comply with all safe work practices and actively participate in all site safety initiatives. - Perform all tasks in a safe manner, adhering to all company, department, and EHS policies and procedures.  (Not sure how this is different from the previous bullet) - Work at the direction of Metallurgical Laboratory Manager.

Your Role As a Field Engineer, you will conduct hands-on field inspections of power boilers, pressure vessels, power piping, steam turbines, and related critical components.  The position is based out of our Cranston, RI office.  The successful candidate is willing to learn and apply project management, nondestructive testing, metallurgy, and applicable codes and standards for the power generation and process industries.  This position requires 60%-70% travel.

RISE Engineering is seeking a Residential Energy Specialist to conduct scheduled home energy assessments. This position is full time, Monday – Friday, 8:00am – 5:00pm, and will be located in the Cranston, RI office.    - Conduct thorough, accurate residential energy audits to evaluate factors such as insulation, appliances, HVAC systems, lighting and electrical systems, moisture and air quality that affect home energy use, durability, safety and comfort.   - Conduct in-home energy tests on the combustion appliances and install instant-savings measures such as energy-efficient light bulbs and water-conservation devices.   - Use proprietary software to prepare on-site assessment reports.   - Explain recommended energy-efficiency measures and associated benefits, costs and savings.   - Secure homeowner approval of proposed work and coordinate available rebates and financing options.   - Follow up with homeowners to ensure high customer satisfaction.   - With company support, obtain BPI Building Analyst certification within six months of hire.   

As a Field Technician, you will assist the field crew with field condition assessments and inspections of boilers, vessels, piping, steam turbines and related critical components in the power, utility, chemical, food processing and paper mill industries.  This position requires frequent overnight out of town travel.  This position frequently operates in a variety of power and utility plants.  - General laboring duties (equipment set up, equipment break down, gathering tools, etc.) - Assist at the project site with field condition assessments. - Assist at the project site with field inspections of various critical components. - Operating various types of hand tools and power equipment. - Perform other duties as assigned or required to support the team.

RISE is seeking a Residential Energy Specialist to conduct scheduled home energy assessments. This position is full time, Monday – Friday, 8am – 5pm. As the Energy Specialist you would conduct energy assessments of residential homes on behalf of utilities and energy program sponsors. Energy Specialists identify potential energy efficiency measures, develop and present proposed work plans to energy end-users. This is an excellent career opportunity for individuals with energy efficiency experience and for candidates with specialized experience in applicable technologies.   Duties and Responsibilities: - Conduct thorough, accurate residential energy audits to evaluate factors such as insulation, appliances, HVAC systems, lighting and electrical systems, moisture and air quality that affect home energy use, durability, safety and comfort. - Conduct in-home energy tests on the combustion appliances and install instant- savings measures such as energy-efficient light bulbs and water-conservation - Use proprietary software to prepare on-site assessment reports. - Explain recommended energy-efficiency measures and associated benefits, costs and savings. - Secure homeowner approval of proposed work and coordinate available rebates and financing - Follow up with homeowners to ensure high customer - With company support, obtain BPI Building Analyst certification within six months of hire 

The Residential Inspector conducts in-home quality assurance inspections of subcontracted work for customers of RI Energy.  Inspectors visit residences at the start, during and/or upon completion of work, with follow-up visits as needed to ensure customer satisfaction. Inspectors visit residences at the start, during and/or upon completion of work, with follow-up visits as needed to ensure customer satisfaction. This position is based out of our field office in Cranston, RI.      Essential Duties and Responsibilities: - Interpret written and sketched work orders. - Train, direct and maintain good working relationships with installation crews. - Interact with homeowners effectively and diplomatically during site visits and when issues arise. - Facilitate on-site work to ensure completion in a timely manner. - Perform diagnostic tests (blower door and combustion safety tests, infrared scans) and employ other inspection methods to ensure that all installed materials and equipment adhere to quality standards. - Document findings, including digital photos of any problems/discrepancies. - Resolve any minor deficiencies or customer issues during inspection visit. - Create and approve change orders as needed. - Obtain homeowner signatures on work completion forms and prepare inspection reports. - Communicate with the RISE office, homeowners, contractors, municipal building officials and others in a clear, professional and timely manner. - With company support, obtain BPI Envelope Professional certification within six months of hire - Performs other duties as needed or assigned to support the team

As a Mechanical Designer, you will provide on-site engineering and support, collaborating with a team of engineers and designers with diverse backgrounds and experience levels.  This is an exciting opportunity to gain engineering design experience and advance your knowledge in plumbing, fire protection and HVAC design.   Conduct design review and commissioning services for plumbing, fire sprinkler, and HVAC systems. Duties include review of designs and submittals; verification of as-built and redline drawings; construction surveys and inspections; development and partial witnessing of pre-functional checklists; and development and executing functional performance tests.  - Review of designs will include evaluating whether the designer has met the owner’s intent based on contract serviceability, maintainability, and operability requirements, that the designer has adhered to all applicable building codes, and assess whether systems and components are adequately sized for owner/tenant identified requirements.  - Use BIM systems and drafting software to produce engineered drawings. - Provide technical assistance to develop statements of work for projects related to all aspects of the built environment for building owner and stakeholders  - Apply fundamental engineering principles to create efficient, practical solutions to design challenges that are not addressed by the straightforward application of existing protection codes and standards.  - Use code and accepted engineering practices to size waste & vent, natural gas, and domestic plumbing systems. - Use specialized software to perform hydraulic calculations for the sizing of fire sprinkler systems. - Perform HVAC load calculations and assist with equipment selection. - Meet client and customer needs and expectations by completing assigned tasks in the time allotted, and effectively communicating with project team members, clients, customers, and others. Compose technical letters and reports to address specific technical concepts as may be needed by assigned tasks.

As a Journeyman Electrician, you will perform the installation and retrofitting of premium efficiency lighting in a wide variety of commercial and industrial facilities.  You will work with a variety of ladders and aerial lifts to perform the installations, and will be required to drive from location to location throughout the course of the workday and work week.  This position requires strict adherence to company safety guidelines and practices, as well as maintaining a clean work site that minimally interferes with customers’ business operations.  The position is responsible for the Cape Cod territory.

RISE is seeking an Energy Efficiency Representative to be responsible to passionately explain and install no-cost energy efficiency measures in commercial buildings, apartment complexes and condominiums to support utility-sponsored energy efficiency programs in Massachusetts.   The position is based out of the Canton, MA territory.  Hours are M-F, 8:00am- 5:00pm. - Generate domestic-hot-water installation opportunities by following up on commercial leads in the field - Clearly explain energy-efficiency program objectives to prospective customers - Install low flow, pre-rinse spray valves and other energy efficiency measures - Record data and complete installation paperwork - Travel throughout the service territory on a daily basis - Complete tasks within set timelines and adapt quickly to change - Adhere to the company’s safety policies and procedures

As a construction testing Field Technician, you will perform light to moderate labor-intensive field and lab duties and testing under the direction of other technicians or staff professionals with minimal analysis of data required. This full-time position will work out of the Cranston, RI location with occasional local travel within RI and MA. Training is available!    Essential Duties and Responsibilities:   - Perform field and occasional lab testing of soils, concrete and asphalt to determine compliance with project specifications.   - All testing reports and observations must be tabulated and submitted daily in an electric report   - Reading and interpreting project drawings and specifications, and entering data related to the various job tasks.   - You will be required to keep equipment clean and in good working order.   - Interact with construction personnel, engineers and state and federal representatives while presenting yourself as a professional representative of the company.   - Responsible for transporting material samples to laboratory for further testing and analysis    - Driving and maintaining the appearance and operation of company vehicles to and from job sites.   - All work with be conducted in accordance with OSHA regulations and TEI Safety standards    - This job operates in both a professional office environment as well as on a variety of outdoor job sites - Position will entail occasional exposure to outside work, dusty environments as well as sedentary work.   Physical Demands:   Continuous:   - Lifting up to and over 50 lbs. in both a vertical and horizontal range of motion.   - Standing   Frequent:   - Lifting over 75 lbs.   - Climbing stairs   - Sedentary work   - Reading, typing and computer input   - Stooping, walking, bending, reaching, pulling and pushing   - Clarity of vision at both over 20 feet and under 20 inches   - Able to judge depth, have a good field of vision, and identify and distinguish colors.    Occasional:   - Outside work   - Navigate uneven terrain   - Driving   - Clarity of vision at both over 20 feet and under 20 inches   - Able to judge depth, have a good field of vision, and identify and distinguish colors.    - Sedentary work  

As a Project Manager for RISE Engineering, a division of Thielsch Engineering, you will deliver services to multi-family facilities in Rhode Island through energy efficiency initiatives sponsored by gas and electric utilities. This represents an excellent opportunity for a highly organized, personable, and technically competent individual to build a platform for continued growth and advancement.    - This position is responsible for working with owners and property managers of multifamily sites to arrange for comprehensive energy efficiency upgrades to both common area and dwelling units in targeted eligible buildings. - Initiate and/or perform on-site energy evaluations. - Develop recommendations and specifications for improvements. - Secure commitments from targeted sites to proceed with project installations. - Coordinate with suppliers, subcontractors, and other in-house RISE resources to arrange professional installation of desired improvements.

Field Engineering Services, a division of Thielsch Engineering, Inc. is seeking a highly skilled individual to fill our Welder position based out of our Cranston, RI location. As a Welder, you will perform all kinds of welding, brazing and soldering to pressure vessels, piping, structural steel and industrial equipment in shop and field environments.  Additional tasks include:  demolition, mechanical, mill wright and rigging.     Essential Duties and Responsibilities - Receives instruction, prints and work orders for the job. - Fabricates equipment by cutting, burning and welding and forming various metals.  Repairs equipment by using welding techniques and appropriate welding equipment. - Cleans and prepares surfaces to be welded.  Sets up, assembles and tack weld parts. - Builds up worn or defective surfaces. - Uses burning equipment to dismantle assemblies and to cut material to size and shape. - Keeps equipment and work area clean and orderly. - Field and shop weld demo and installation repair all types of industrial equipment. - Lays out, positions, and secures parts and assemblies according to specifications, using straightedge, combination square, calipers, and ruler. - Tack-welds or welds components and assemblies, using electric, gas, arc, or other welding equipment. - Cuts work piece, using powered saws, hand shears, or chipping knife. - Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form. - Installs or repairs equipment, such as lead pipes, valves, floors, and tank linings. - Observes tests on welded surfaces, such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications. - Inspects grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments. - Removes rough spots from workpiece, using portable grinder, hand file, or scraper. - Welds components in flat, vertical, or overhead positions. - Heats, forms, and dresses metal parts, using hand tools, torch, or arc welding equipment. - Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc. - Analyzes engineering drawings and specifications to plan layout, assembly, and welding operations. - Develops templates and other work aids to hold and align parts. - Determines required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques. - Perform other duties as assigned or required to support the team.